Non-toxic Rodent Bait Blocks
By Ralph H Maestre BCE
Reprinted and update from 2012
Non-toxic baits also known as monitoring/tracking baits (MTBs) are being used as part of our "Green Certified Services", in our Park Jobs, Sewer Jobs, and Food Processing Programs in an effort to reduce overall rodenticide use and following integrated pest management (IPM) principles. Magic has been introducing non-toxic baits into other aspects of our daily pest management programs. Magic uses only the product known as DETEX® Blox with Biomarker by Bell Labs®. After reading an article in the Techletter by Pinto & Associates' May 27th, 2012, I thought it would be a good idea to share it with you. Non-toxic rodent bait blocks are used for many different reasons and the article listed 18 of them. My opinions are marked of by the Bold, Italic, and Underline:
1. Because they are non-toxic, blocks can be placed in areas where toxic baits may not be permitted. There are minimal safety or regulatory concerns, and no worries about non-target poisoning or bait translocation. This will reduce the chances of secondary poisoning in all our baiting programs. Our clients have strong concerns regarding their pets and wildlife such as hawks. Magic cares and we show this by only using rodenticides when and where required.
2. Limiting the use of toxic bait and increased reliance on monitoring for rodent activity appeals to customers who want an integrated pest management component. Bio-monitoring for rodent can be part of your "green" service offerings. Without a doubt, this is a very important point of the "Certified Green Shield Services" Magic is offering to customers.
3. The presence of rodent tooth marks on non-toxic blocks placed in bait stations and other sites provides positive evidence of rodent infestation that can be presented to the customer. You can even give blocks to customers for placement so they can check for gnawing activity themselves. It is Magic's company policy not to give our clients materials. If they request it, we will place it in tamper resistant bait stations for them and service the equipment. Gnawing either non-toxic or toxic bait will provide positive evidence of rodent activity.
4. Use of non-toxic blocks in pre-baiting programs helps overcome bait shyness. It gets the rodents used to feeding on an actual bait block, rather than people food, to make the transition easier when you substitute toxic blocks. It's best to use the same manufacturer's rodenticide so that the shapes of the block and food base are the same. Remember this may require some time before the rodents are re-trained to feed on bait blocks if they became bait shy. Our customers will need to be educated about this process.
5. Non-toxic blocks can be used to pinpoint active feeding sites, telling you the location to concentrate your control efforts. Bait sites where you suspect rodent activity and check back a few days later to see which blocks have the most gnawing tooth marks. Make note of these locations because this is where you should place your toxic baits or traps. If the blocks are untouched, don't bother baiting or trapping there. Make more placements in sites with the greatest amount of feeding. In an IPM program using non-toxic bait will promote reduce pesticide usage and provide minimum risk to non-target mammals.
6. You'll use less rodenticide because pre-baiting with MTBs will have located travel routes and harborage sites where toxic baits can be concentrated, giving the best results and wasting less bait. Reducing the use of rodenticide in and around our client's establishments is Magic's goal while targeting the problem areas. This is the responsible direction that Magic is taking.
7. Non-toxic blocks help you determine the size of the population by gauging the amount of feeding. Is there a lot of gnawing or only a little? Do you have to replace blocks that were completely eaten? The number of dyed droppings also gives clues about the size of the infestation. As Magic's professionalism grows with education, we will be able to outperform our competition by finding the source of the rodent problems quickly and not just masking it.
8. Monitoring blocks can be used to track the movement of rodents through their dyed dropping to help determine where to place traps or toxic bait. You can assess travel routes or runways, travel distance, nest locations, and entry points by observing droppings. Place MTBs in ceiling voids to determine whether rodents are active in these spaces. Although other methods may be used such as visual inspections, sometimes we lose the path to where they nest because the rodents disappear into voids and exist elsewhere. Using rodenticides straight up may cause the rodent to become disoriented and give us false trails back to their nest or entry points.
9. Find rodent entry points using MTBs. To determine whether rodents are moving into facility from outside, place MTB-baited stations only on the outside. Dyed dropping seen inside will confirm that rodents are moving in from outside. This is one of the most important points. When Magic finds the entry point and excludes, it we solve pest problems.
10. Use the blocks for ongoing monitoring in sensitive accounts. In food facilities and warehouses, for example, use the blocks as early warning signs to identify incoming rodent infestations, and to gauge the success of your controls. More and more regulations will require us to document how we perform our rodent control programs. By monitoring and documenting our decision process will separate Magic from our competitors as highly professional and responsible. The latest computer programing allows Magic to create quality reports that USDA, other Interested parties, and our clientele find superior to our competitors.
11. Maintain baiting continuity in an ongoing rodenticide baiting program by replacing bait at inactive stations with MTBs. This allows you to keep the station in place and on your map and converts it to a temporary monitoring station ready to revert back to toxic bait when activity is noticed. A good point in reducing our overall rodenticide use yet maintaining a program that allows us to document and quickly introduce the rodenticide without creating bait shyness. Less paperwork in our logbooks since we will not have to replace or modify our maps. This will result in quick control of an emerging rodent problem.
12. Use the blocks as part of UV black light inspections. We already uses UV light to detect rodent urine, but now the dropping of rodents that have fed on DETEX with Biomarker will also glow neon green under UV light. Using a handheld black light to track rodent movement gives an added component to inspections. This will provide quicker inspections, reducing callbacks, and initiation of quicker rodent controls. In dark areas where we have a hard time distinguishing between small particles and rodent droppings, the Biomarker will allow us to save time and confirm rodent pathways.
13. Improve trapping results by adding MTBs to snap traps, glueboards, or multi-catch rodent traps. The blocks serve as a food bait to entice rodents to the traps and also keep rodents alive until multi-catch traps can be serviced. This may provide limited results since most rodents will die first from stress or hypothermia while inside a mutli-catch devise. It may be useful on large rat mats. Now with the new soft bait version of the Detex MTB it provides a more palatable material to use on various traps and stations.
14. MTBs can help determine whether burrows are active. Use a black light to see if dropping in the burrow fluoresce (DETEX only). Since many of us cannot tell if a rodent burrow is active this may be useful.
15. With practice, you can read the gnawing on the block baits to identify the pest and any non-targets feeding. Rodents gnaw at the edges of the block while insects will eat depressions in the block. Mouse gnawing leaves fine lines on the edges while rats leave larger and more distinctive tooth marks or grooves. This will occur on either non-toxic or toxic bait. The education is valuable. Each of you should take notes and learn this point.
16. Survey sewers by wiring the block to the manhole cover or top rung of the ladder and dropping it down onto a ledge (don't enter the manhole unless you have had confined spaces training and are in compliance with all rules). Magic rarely services the sewers manholes directly. We do service the catch basins, so this point applies directly to catch basins.
17. MTBs are exempt from EPA's new rodenticide label changes. You can bait burrows with MTBs and can bait any distance from a building, along fence lines, wherever. Using MTBs for perimeter baiting means you are not killing other non-target small mammals. This is very important since many of our clients desire tamper resistant bait stations along the fence lines on their properties. This allows us to monitor activity and find the burrow system quicker than just monitoring along the perimeter of the home or building structure. At times, rodent problems occur in an open field or groundcover are that the new label laws prohibit from using bait stations with rodenticides. An active trapping program would have to be used.
18. Cockroaches will feed on MTBs and their droppings also glow under black light. Use DETEX bait blocks in suspect areas to track the movement of American cockroaches, through their droppings, to determine whether or not they are coming from sewers or basements. This will also reduce rodenticide waste and or possible spillage.
As you can read, there is a lot that is offered by using the DETEX® Blox in a rodent program. All 18 point where taken from the May issue of Techletter by Pinto & Associates. More information may be obtained at www.techletter.com